Service for installers & end customers

We won't leave you out in the rain.

Answers to the most frequent questions, installation and care instructions – and a direct line to our shower experts.

FAQ

Frequently asked questions.

Your question is not listed? We are happy to advise you personally.

+41 61 981 22 24
contact@jemaniblue.com

Slide rails

Can slide rail tubes be shortened?

Yes, the rails can generally be shortened. The rail must be shortened on the side without the horizontal hole. Please remove the end cap before shortening; it can be refitted afterwards. Shortening may damage the chrome layer, which voids the warranty.

Shower system Home 3F (A300533)

Switching from overhead shower to hand shower does not work?

Please connect or screw the short hose to the front of the diverter and the long hose to the back of the diverter.

Can the rail be shortened?

No, it cannot be shortened.

Hand and overhead showers

Why does the overhead shower drip after use?

An overhead shower dripping after use has various causes and is completely normal. To let it drain quickly, we recommend tilting the overhead shower after use. This prevents long dripping and the nozzles calcify less.

What is the flow rate of the hand and overhead showers?

Almost all of our hand and overhead showers have a built-in flow limiter. The average flow rate is 12 l/min ±15 %.

Why does the water suddenly no longer flow evenly from the hand or overhead shower?

The silicone nozzles can easily be descaled by rubbing. Nevertheless, it is important to descale overhead and hand showers regularly with a mild vinegar cleaner to prevent limescale deposits.

Is the overhead shower adjustable?

Yes, the overhead shower has a built-in ball joint that allows it to be swivelled in all directions.

Soap dish

Can the soap dish be mounted on all slide rails?

Our soap dishes come with adapters for Ø 22 mm or Ø 25 mm tubes and can be retrofitted to any round tube with these diameters.

Thermostatic shower systems

Can the riser of the START and HOME thermostats be swivelled?

Yes, the riser can be swivelled and adjusted in height.

Can the riser of the PRO thermostats be swivelled?

No, but during installation the riser can be tightened at a suitable angle. Swivelling the riser afterwards is not possible and damages the product. The upper bracket is also height-adjustable during installation.

The push diverter from hand to overhead shower does not work properly.

Please check the following points:

  • Has the guide bush of the diverter loosened through use? Please retighten (see video 1).
  • Are deposits such as limescale and dirt blocking the diverter, or has the diverter cartridge come loose? Remove the cover according to the instructions and follow the steps in the video.
  • Remove all dirt and limescale deposits and tighten the outer ring firmly. Please make sure the cartridge is tightened securely.

It is important that all supplied parts, especially the filters for the wall connection, are installed. Foreign particles damage the cartridges, and the warranty expires if original parts have not been fitted.

If the diverter still does not work satisfactorily after servicing, it may be defective. Please get in touch with us.

Leak between riser connection (no. 16) and system riser (no. 3)?

Check whether the riser connection has been tightened with a hex key and both O-rings are intact – please lightly grease the O-rings before fitting the system riser. You can obtain new O-rings from our customer service.

Can the length of the system riser be changed?

Yes, the riser can be extended by 20 cm with an extension (A200029). Unfortunately, the riser cannot be shortened.

Care instructions

So that surfaces shine like on the first day.

When caring for the products, always observe:

  • Suitable cleanersOnly use cleaning agents expressly intended for this application.
  • No aggressive acidsCleaners containing hydrochloric acid, formic acid, chlorine bleach or acetic acid can cause considerable damage. Cleaners containing phosphoric acid can only be used to a limited extent.
  • Do not mixMixing cleaning agents is generally not permitted.
  • Nothing abrasiveDo not use abrasives, scouring pads or microfibre cloths.
  • Follow the instructionsAlways follow the cleaning agent manufacturer's instructions, dosage and exposure time.
  • Clean regularlyPrevent limescale build-up through regular cleaning.
  • Spray onto the clothNever spray cleaning solution directly onto the products, but onto the cloth – spray mist can penetrate openings and gaps.
Request the range